Оксианион

Оксианион или oxoanion , является ион с общей формулой А
_ИксО^{г -}
_у(где A представляет собой химический элемент, а O представляет собой атом кислорода ). Оксианионы образуются из подавляющего большинства химических элементов . ^[1] Формулы простых оксианионов определяются правилом октетов . Соответствующая оксикислота оксианиона представляет собой соединение H
_zА
_ИксО
_y. Структуры конденсированных оксианионов можно рационализировать в терминах многогранных единиц AO _n с разделением углов или ребер между многогранниками. Оксианионы (в частности, фосфатные и полифосфатные эфиры) аденозинмонофосфат ( AMP ), аденозиндифосфат ( ADP ) и аденозинтрифосфат (ATP) важны в биологии.

Мономерные оксианионы [ править ]

Формула мономерных оксианионов, АО^{м -}
_н, продиктовано степенью окисления элемента A и его положением в периодической таблице . Максимальное координационное число элементов первого ряда ограничено 4. Однако ни один из элементов первого ряда не имеет мономерного оксианиона с таким координационным числом. Вместо этого карбонат ( CO^2-
₃) и нитратов ( NO^-
₃) имеют тригональную планарную структуру с π-связью между центральным атомом и атомами кислорода. Этой π-связи способствует сходство размеров центрального атома и кислорода.

Оксианионы элементов второго ряда в групповой степени окисления являются тетраэдрическими . Тетраэдрические звенья SiO ₄ обнаружены в оливиновых минералах [Mg, Fe] SiO ₄ , но анион не существует отдельно, поскольку атомы кислорода тетраэдрически окружены катионами в твердом состоянии. Фосфат ( PO^3-
₄), сульфат ( SO^2-
₄) и перхлорат ( ClO^-
₄) ионы могут быть найдены как таковые в различных солях. Многие оксианионы элементов в более низкой степени окисления подчиняются правилу октетов, и это может быть использовано для рационализации принятых формул. Например, хлор (V) имеет два валентных электрона, поэтому он может вместить три пары электронов из связей с ионами оксида. Заряд иона равен +5 - 3 × 2 = −1, поэтому формула ClO^-
₃. Теория VSEPR предсказывает пирамидальную структуру иона с тремя связующими электронными парами и одной неподеленной парой. Аналогичным образом оксианион хлора (III) имеет формулу ClO^-
₂, и изгибается двумя неподеленными парами и двумя парами соединений.

Состояние окисления	Имя	Формула	Изображение
+1	Гипохлорит ион	ClO -
+3	Хлорит ион	ClO- 2
+5	Хлорат ион	ClO- 3
+7	Перхлорат ион	ClO- 4

В третьей и последующих строках периодической таблицы возможна 6-координация, но изолированные октаэдрические оксианионы неизвестны, потому что они несут слишком высокий электрический заряд. Таким образом, молибден (VI) не образует MoO^6-
₆, но образует тетраэдрический молибдат- анион MoO^2-
₄. Единицы MoO ₆ находятся в конденсированных молибдатах. Полностью протонированные оксианионы с октаэдрической структурой обнаруживаются в таких частицах, как Sn (OH).^2-
₆и Sb (OH)^-
₆. Кроме того, ортопериодат может быть протонирован только частично, а H
₃IO^2-
₆|| ⇌ || ЧАС
₂IO^3-
₆|| + H ⁺ с p K _a = 11,60. ^{[2] [3]}

Именование [ править ]

Обозначение мономерных оксианионов следует по следующим правилам.

Если центральный атом не входит в группу VII или VIII

Если центральный атом находится в группе VII или VIII

Condensation reactions[edit]

In aqueous solution, oxyanions with high charge can undergo condensation reactions, such as in the formation of the dichromate ion, Cr
₂O²⁻
₇:

2 CrO²⁻
₄ + 2 H⁺ ⇌ Cr
₂O²⁻
₇ + H₂O

The driving force for this reaction is the reduction of electrical charge density on the anion and the elimination of the H+ ion. The amount of order in the solution is decreased, releasing a certain amount of entropy which makes the Gibbs free energy more negative and favors the forward reaction. It is an example of an acid–base reaction with the monomeric oxyanion acting as a base and the condensed oxyanion acting as its conjugate acid. The reverse reaction is a hydrolysis reaction, as a water molecule, acting as a base, is split. Further condensation may occur, particularly with anions of higher charge, as occurs with adenosine phosphates.

The conversion of ATP to ADP is an hydrolysis reaction and is an important source of energy in biological systems.

The formation of most silicate minerals can be viewed as the result of a de-condensation reaction in which silica reacts with a basic oxide, an acid–base reaction in the Lux–Flood sense.

CaO (base) + SiO₂ (acid) → CaSiO₃

Structures and formulae of polyoxyanions[edit]

A polyoxyanion is a polymeric oxyanion in which multiple oxyanion monomers, usually regarded as MO_n polyhedra, are joined by sharing corners or edges.^[4] When two corners of a polyhedron are shared the resulting structure may be a chain or a ring. Short chains occur, for example, in polyphosphates. Inosilicates, such as pyroxenes, have a long chain of SiO₄ tetrahedra each sharing two corners. The same structure occurs in so-called meta-vanadates, such as ammonium metavanadate, NH₄VO₃.

The formula of the oxyanion SiO²⁻
₃ is obtained as follows: each nominal silicon ion (Si⁴⁺) is attached to two nominal oxide ions (O²⁻) and has a half share in two others. Thus the stoichiometry and charge are given by:

Stoichiometry: Si + 2 O + (2 × 1⁄2) O = SiO₃

Charge: +4 + (2 × −2) + (2 × (1⁄2 × −2)) = −2.

A ring can be viewed as a chain in which the two ends have been joined. Cyclic triphosphate, P
₃O³⁻
₉ is an example.

When three corners are shared the structure extends into two dimensions. In amphiboles, (of which asbestos is an example) two chains are linked together by sharing of a third corner on alternate places along the chain. This results in an ideal formula Si
₄O⁶⁻
₁₁ and a linear chain structure which explains the fibrous nature of these minerals. Sharing of all three corners can result in a sheet structure, as in mica, Si
₂O²⁻
₅, in which each silicon has one oxygen to itself and a half-share in three others. Crystalline mica can be cleaved into very thin sheets.

The sharing of all four corners of the tetrahedra results in a 3-dimensional structure, such as in quartz. Aluminosilicates are minerals in which some silicon is replaced by aluminium. However, the oxidation state of aluminium is one less than that of silicon, so the replacement must be accompanied by the addition of another cation. The number of possible combinations of such a structure is very large, which is, in part, the reason why there are so many aluminosilicates.

Octahedral MO₆ units are common in oxyanions of the larger transition metals. Some compounds, such as salts of the chain-polymeric ion, Mo
₂O²⁻
₇ even contain both tetrahedral and octahedral units.^[5][6] Edge-sharing is common in ions containing octahedral building blocks and the octahedra are usually distorted to reduce the strain at the bridging oxygen atoms. This results in 3-dimensional structures called polyoxometalates. Typical examples occur in the Keggin structure of the phosphomolybdate ion. Edge sharing is an effective means of reducing electrical charge density, as can be seen with the hypothetical condensation reaction involving two octahedra:

2 MOⁿ⁻
₆ + 4 H⁺ → Mo
₂O⁽ⁿ⁻⁴⁾⁻
₁₀ + 2 H₂O

Here, the average charge on each M atom is reduced by 2. The efficacy of edge-sharing is demonstrated by the following reaction, which occurs when an alkaline aqueous solution of molybdate is acidified.

7 MoO²⁻
₄ + 8 H⁺ ⇌ Mo
₇O⁶⁻
₂₄ + 4 H₂O

The tetrahedral molybdate ion is converted into a cluster of 7 edge-linked octahedra^[6][7] giving an average charge on each molybdenum of 6⁄7. The heptamolybdate cluster is so stable that clusters with between 2 and 6 molybdate units have not been detected even though they must be formed as intermediates.

Heuristic for acidity[edit]

The pKa of the related acids can be guessed from the number of double bonds to oxygen. Thus perchloric acid is a very strong acid while hypochlorous acid is very weak. A simple rule usually works to within about 1 pH unit.

Acid–base properties[edit]

Most oxyanions are weak bases and can be protonated to give acids or acid salts. For example, the phosphate ion can be successively protonated to form phosphoric acid.

PO³⁻
₄ + H⁺ ⇌ HPO²⁻
₄

HPO²⁻
₄ + H⁺ ⇌ H
₂PO⁻
₄

H
₂PO⁻
₄+ H⁺ ⇌ H₃PO₄

The extent of protonation in aqueous solution will depend on the acid dissociation constants and pH. For example, AMP (adenosine monophosphate) has a pK_a value of 6.21,^[8] so at pH 7 it will be about 10% protonated. Charge neutralization is an important factor in these protonation reactions. By contrast, the univalent anions perchlorate and permanganate ions are very difficult to protonate and so the corresponding acids are strong acids.

Although acids such as phosphoric acid are written as H₃PO₄, the protons are attached to oxygen atoms forming hydroxyl groups, so the formula can also be written as OP(OH)₃ to better reflect the structure. Sulfuric acid may be written as O₂S(OH)₂; this is the molecule observed in the gas phase.

The phosphite ion, PO³⁻
₃, is a strong base, and so always carries at least one proton. In this case the proton is attached directly to the phosphorus atom with the structure HPO²⁻
₃. In forming this ion, the phosphite ion is behaving as a Lewis base and donating a pair of electrons to the Lewis acid, H⁺.

As mentioned above, a condensation reaction is also an acid–base reaction. In many systems, both protonation and condensation reactions can occur. The case of the chromate ion provides a relatively simple example. In the predominance diagram for chromate, shown at the right, pCr stands for the negative logarithm of the chromium concentration and pH stands for the negative logarithm of H⁺ ion concentration. There are two independent equilibria. Equilibrium constants are defined as follows.^[9]

CrO2− 4 + H+ ⇌ HCrO− 4	${\displaystyle K_{1}={\frac {[\mathrm {HCrO_{4}^{-}} ]}{[\mathrm {CrO_{4}^{2-}} ][\mathrm {H^{+}} ]}}}$	log K1 = 5.89
2 HCrO− 4 ⇌ Cr 2O2− 7 + H2O	${\displaystyle K_{2}={\frac {[\mathrm {Cr_{2}O_{7}^{2-}} ]}{[\mathrm {HCrO_{4}^{-}} ]^{2}}}}$	log K2 = 2.05

The predominance diagram is interpreted as follows.

• The chromate ion, CrO²⁻
  ₄, is the predominant species at high pH. As pH rises the chromate ion becomes ever more predominant, until it is the only species in solutions with pH > 6.75.
• At pH < pK₁ the hydrogen chromate ion, HCrO⁻
  ₄ is predominant in dilute solution.
• The dichromate ion, Cr
  ₂O²⁻
  ₇, is predominant in more concentrated solutions, except at high pH.

The species H₂CrO₄ and HCr
₂O⁻
₇ are not shown as they are formed only at very low pH.

Predominance diagrams can become very complicated when many polymeric species can be formed,^[10] such as in vanadates, molybdates, and tungstates. Another complication is that many of the higher polymers are formed extremely slowly, such that equilibrium may not be attained even in months, leading to possible errors in the equilibrium constants and the predominance diagram.

See also[edit]

• Oxycation
• Fluoroanion
• Carbanion

References[edit]